Y-Clean BIO-SIL Dash RTU is an auto care polish, formulated with a polydimethylsiloxane and a curable Polymer. BIO-SIL Dash RTU, enhances tyres, rubber mould surfaces, most non-painted bumpers and most dashboards. BIO-SIL Dash RTU, once cured forms a 100% dry high gloss film, which can last longer than other tyre and dash products. BIO-SIL Dash RTU is ready to use from the shipping container.
COMMON AREAS OF USE
Enhance black tyres and rubber mould surfaces.
DIRECTIONS FOR USEIn a shaded area, make sure surface to be treated is clean and free from dirt, dust and oil/grease. If using a brush, then brush BIO-SIL Dash RTU onto substrate surface and leave for a few seconds, before wiping lightly over the treated surface with a clean soft rag. The curing speed is determined by the climate. The best results are achieved by applying with a spray apparatus and light wipe with a clean rag. BIO-SIL Dash RTU is a ready to use product and should not be reduced with water, this would weaken the performance of the product and lower gloss of the cured film.
Do not splash products onto porous surfaces as this product will cause staining which when cured cannot be removed. Should the product splash, immediately rinse area with copious amount of water and soap before curing sets in. Testing on small areas should always be conducted before complete application
Keep in a cool, dry and well ventilated area at ambient temperatures.
Keep out of reach of children. Avoid contact with skin and eyes.
Will cause irritation. Flush with plenty of water and seek medical attention if required.
May cause irritation. Wear protective gloves if required. Wash with water.
May cause nausea and vomiting. Do not induce vomiting, drink plenty of water and seek medical attention.
PLEASE NOTE• Material Safety Data Sheets are available upon request.
• The shelf life period is 2 years from date of manufacture.