BIO-SIL DASH RTU is an auto care polish, formulated with a polydimethylsiloxane and a curable Polymer. BIOSIL DASH RTU, enhances tyres, rubber mould surfaces, most non-painted bumpers and most dashboards. BIO-SIL DASH RTU, once cured forms a 100% dry high gloss film, which can last longer than other tyre and dash products. BIO-SIL DASH RTU is ready to use from the shipping container.
Common Areas of Use.
Most Rubber Molded Surfaces
Most automotive non-painted plastics
All Tyre Surfaces
Most Automotive Dash Boards
In a shaded area, make sure surface to be treated is clean and free from dirt, dust and oil/grease. If using a brush, then brush BIO-SIL DASH RTU onto substrate surface and leave for a few seconds, before wiping lightly over the treated surface with a clean soft rag. The curing speed is determined by the climate. The best results are achieved by applying with a spray apparatus and light wipe with a clean rag. BIO-SIL DASH RTU is a ready to use product and should not be reduced with water, this would weaken the performance of the product and lower gloss of the cured film.
Do not splash products onto porous surfaces as this product will cause staining which when cured cannot be removed. Should the product splash, immediately rinse area with copious amount of water and soap before curing sets in. Testing on small areas should always be conducted before complete application.
Testing before formulating should be carried out as systems vary.
Material Safety Data Sheets are available upon request.
The shelf life period without testing is 12 months from date of manufacture, if stored in the original unopened container at 2°C to 39°C.
Emulsions have the tendency to separate when stored for extended periods; this does not indicate shelf life failure, after mild agitation this emulsion will still perform effectively.