top of page
Untitled design (22).png
Siltech 100 General Purpose  silicone

Siltech 100
GP Acetoxy
Silicone Sealant.

SILTECH 100 is a one-part acetoxy silicone sealant that cures with atmospheric moisture to form a rubber-like seal for specialized glazing sealing and bonding applications – joint sealing and assembly. Weathering and UV resistance are excellent, important in glazing applications where most organic sealants fail. SILTECH 100 is unaffected by high or low temperatures and exabits good physical properties are designed to give outstanding durability and performance. SILTECH 100 is suitable for sanitary applications.

​

Available in:​

280ml Cartridges  •190kg Drums

SANITARYAPPLICATIONS
EXCELLENT WEATHER PROPERTIES
GLAZING
DURABILITY
EXCELLENT UVRESISTANCE

Applications

  • Standard glazing

  • Cap beading

  • General sealing and assembly

  • Cold room panel sealing

  • General bonding & insulation

  • Metal to metal joints

  • Sign manufacturing / assembly cladding

Properties

SILTECH 100, when cured is resistant to UV radiation, moisture, extreme temperature fluctuations, tensile and compressive stresses.

​

  • Acid curing

  • High intensity, fast curing

  • Good tightness, weathering resistant, UV resistant

  • Ozone resistant, water resistant

  • High and low temperature resistant

* For more information please view our data sheet.

Untitled design (22).png
Siltech 1000 General Purpose Silicone

Siltech 1000
GP Acetoxy
Silicone Sealant.

SILTECH 1000 is a non-slump, fast curing, one component acetoxy silicone, which cures at room temperature under the action of atmospheric moisture to give a high strength elastomeric silicone rubber designed for DIY application, glazing application, joint sealing and assembly.

SILTECH 1000 is suitable for sanitary applications.

​

Available in:​

260ml Cartridges  •190kg Drums

Applications

  • Glazing

  • Cap beading

  • General sealing and assembly

  • Cold room panel sealing

  • General bonding & insulation

  • Metal to metal joints

  • Sign manufacturing / assembly cladding

Properties

SILTECH 1000, when cured is resistant to UV radiation, moisture, extreme temperature fluctuations, tensile and compressive stresses.

​

  • Acid curing

  • High intensity, fast solidification

  • Good tightness, weathering resistant, UV resistant

  • Ozone resistant, water resistant

  • High and low temperature resistant

* For more information please view our data sheet.

Untitled design (22).png
Siltech 300 High Temp Silicone

Siltech 300
High Temp Acetoxy
Silicone Sealant.
(Red)

SILTECH 300 is a non-slump one-part acetoxy silicone. The applied sealant reacts with atmospheric moisture to produce a highly elastic silicone rubber. SILTECH 300 is specifically designed and recommended for high temperature applications.

​

Available in:​

280ml Cartridges  •190kg Drums

*270°C Consistently & 300°C Intermediately

Applications

Heat-exposed automotive form in place gaskets, flue gas systems, heating installations, exhaust gas routing, heating cabinets, ovens, microwaves, fire places and chimnies.

​

​

Properties

  • When cured is resistant to UV radiation, moisture, extreme temperature fluctuations, tensile and compressive stresses.

  • Solvent free, low shrinkage

  • Non-sagging behavior for horizontal, vertical and overhead applications

  • Fast curing at room temperature

  • Adheres to many substrates; glass, ceramic tiles, enamel. Some surfaces require the use of primers.

  • Flexibility at low (-40°C) and high (270°C) temperature

  • Excellent resistance to weather, ozone, UV and chemicals

  • Excellent heat resistance up to 270°C for long periods and up to 300°C for short exposures

* For more information please view our data sheet.

Untitled design (22).png
Untitled design (24).png

Siltech 300NX
High Temp Oxime
Silicone Sealant.
(Grey)

SILTECH 300NX High Temperature Oxime Silicone sealant is one part neutral curing, gunnable silicone sealant.

​

Available in:​

280ml Cartridges  •190kg Drums

*250°C Consistently & 300°C Intermediately

Applications

Heat-exposed automotive form in place gaskets, flue gas systems, heating installations, exhaust gas routing, heating cabinets, ovens, microwaves, fire places and chimnies.

Properties

SILTECH 300 NX, when cured is resistant to UV radiation,
moisture, extreme temperature fluctuations, tensile and
compressive stresses.


• Easy application
• Superior adhesion to a wide range of building materials
including concrete and brickwork
• Long life reliability and low maintenance
• Flexibility with storage time and stock usage
• Can be applied in vertical and overhead joints.
• Suitable for continuous operation in the temperature rang
between -50°C to + 250°C (max.300max)

​

* For more information please view our data sheet.

Untitled design (22).png
Siltech 600 Neutral Oxime Silicone

Siltech 600NX
Neutral Oxime
Silicone Sealant.

SILTECH 600 NX is a fast cure, low modulus silicone sealant which cures with atmospheric moisture to form a highly elastic rubber seal providing excellent performance in glazing and construction applications. SILTECH 600 NX has outstanding weathering and UV resistance. It is recommended for use in building joints and glazing applications.

​

Available in:​

280ml Cartridges  •190kg Drums

Applications

  • Standard glazing

  • General sealing & assembly

  • Cold room panel sealing

  • Expansion joints

  • Perimeter seals

  • General bonding & insulation

  • Metal to metal joints

  • Sign manufacturing / assembly

  • Cladding

  • Perimeter & curtain wall sealing

Properties

  • Fast cure

  • Low modulus silicone sealant

  • Highly elastic rubber seal providing excellent performance in glazing and construction applications.

  • Unaffected by high or low temperatures (-40°C - 120°C)

  • Excellent Weather and UV resistance.

​

* For more information please view our data sheet.

Untitled design (22).png
Siltech 900 Acrylic Sealant 280ml

Siltech 900
Paintable
Acrylic Sealant.

SILTECH 900 is a one component paintable water based sealant, which on curing will form an acrylic rubber sealant that will exhibit very good adhesion characteristics to most construction substrates. The product is designed for interior and exterior use

​

Available in:​

280ml Cartridges  •250kg Drums

Applications

SILTECH 900 was developed for sealing around windows, door frames, baseboards or any joint or gap where a weather-tight seal is required.1 hour dry time is required before painting with latex or oil based paint. Allow extra dry time during periods of high humidity and/or cool temperatures.

  • Treated Wood (Not recommended for untreated wood)

  • Masonry

  • Brick

  • Plaster

Properties

  • Resistant to UV radiation, moisture, extreme temperature fluctuations (Between -30°C & 80°C), and tensile and compressive stresses.

  • The elasticity of the rubber is retained throughout the temperature range indicated.

  • Adheres well to wood, masonry, brick and plaster. It cures to form a seal without staining or bleeding.

​

* For more information please view our data sheet.

Untitled design (22).png
Siltech 9000 Paintable Acrylic Sealant 260ml

Siltech 9000
Paintable
Acrylic Sealant.

Siltech 9000 is a one component paintable water based sealant, which on curing will form an acrylic rubber sealant that will exhibit very good adhesion characteristics to most construction substrates. It is particularly suitable for decorative finis hing before painting, filing of cracks and many other DIY applications.

​

Available in:​

260ml Cartridges  •250kg Drums

Applications

SILTECH 900 was developed for sealing around windows, door frames, baseboards or any joint or gap where a weather-tight seal is required.1 hour dry time is required before painting with latex or oil based paint. Allow extra dry time during periods of high humidity and/or cool temperatures.

  • Wood

  • Masonry

  • Brick

  • Plaster

Properties

  • Resistant to UV radiation, moisture, extreme temperature fluctuations (Between -30°C & 80°C), and tensile and compressive stresses.

  • The elasticity of the rubber is retained throughout the temperature range indicated.

  • Adheres well to wood, masonry, brick and plaster. It cures to form a seal without staining or bleeding.

​

* For more information please view our data sheet.

Untitled design (22).png
7.png

Siltech 4000
Polyurethane
Foam.

SILTECH 4000 is expanding polyurethane foam that can be used to fill cavities, insulate and seal. The 500ml can makes 27 litres of foam while the 750 ml can makes 42 litres of foam respectively. The product demonstrates high foam stability and does not shrink.

​

Available in:

• 500ml Aerosol can 

 750ml Aerosol can

Applications

  • Plaster

  • Concrete

  • Stone

  • Brick

  • Painted surfaces

  • Fiberglass

  • Metals

  • Wood

  • Glass

and many plastics...

Properties

  • High expanding rate

  • Excellent water resistance.

  • Excellent Insulating

  • Cured product can be cut, plastered, drilled and painted.

  • Won't crack with movement.

  • Non-Slumping, does not run off vertical surfaces.

  • No priming required

  • Gap filling - moulds itself to surface irregularities.

  • Mould and fungus resistant

  • Not affected by most solvents.

​

* For more information please view our data sheet.

Untitled design (22).png
8.png

Supra-Sil Spray.

SUPRA-SIL SILICONE SPRAY is a lubricating silicone oil based preparation with a strong and long lasting release action. It is supplied in aerosol cans, which makes it possible to spray an extremely fine mist. 

​

Available in:

• 400ml Aerosol can  

Applications

  • Anti-spatter welding spray

  • Upholstery application

  • Glazing industry

  • Dash/tyre shine

  • General lubrication

  • General purpose release agent.

  • Low load lubricant suitable for drawer runner, curtain rails, American blinds.

  • It can be used to improve the surface gloss and scratch resistance of plastic moulding

  • Improve the slip properties of thermoplastics being processed by extrusion (e.g. pipes and profiles) and to create a smooth surface

  • When machining (drilling, filing, cutting and sawing) plastics and other materials (e.g. stainless steel), this product can be used to ease the passage of the tools through the material.

  • Promote good slip action between articles, e.g. plastic/plastic or plastic/other material.

  • It can be used to treat paper and cardboard punching tools

Properties

  • It can be applied quickly, easily and evenly without the use of other equipment.

  • No brush or cloth is needed for application.

  • The product does not contain solvents.

  • The aerosol uses an environmentally compatible propellant and does not contain CFC’s

  • Strong and long lasting release action

  • Heat resistant - the film does not crack when the release agent is applied to a heated mould

  • Non conductive 

​

* For more information please view our data sheet.

Untitled design (22).png
Polyurethane.png

Polyurethane
Sealant.

PU40 is a single-component, moisture curing, polyurethane-based sealant. PU40 is UV resistant and cures to a paintable, weather & water resistant, permanent elasticity sealant without affecting its volume.

​

Available in:

• 600ml Sausage

Applications

  • Wood

  • Metal

  • Concrete

  • Masonry

  • Reconstituted or cast stone

  • Ceramic

  • Glass

  • A sealant to seal vertical and horizontal expansion joints

  • Construction industry

  • Gap filling properties

  • Non-shrinking on curing

  • Sealing of movement and static joints

​

Properties

  • Single-component

  • Moisture curing

  • Polyurethane-based sealant

  • Easily applied with a bulk filling gun

  • UV resistant

  • Bubble free finish, ideal for sealing

  • When cured product is paintable

  • Weather & water resistant

​

* For more information please view our data sheet.

bottom of page