Bonding Agent
Siltech Bonding Agent T2/T5 is a ready to use, water-based liquid for use in the construction industry as well as in DIY applications. It can be used as a bonding agent between new and old surfaces; as a primer coat prior to plastering, screeding or tiling, particularly if the surface is friable/powdery; as a keying agent on smooth surfaces or as a barrier coating between incompatible surfaces. When added to cement, screeds and grouts, SILTECH Bonding Agent will add flexibility, adhesion and water repellency. T10 is a concentrated alternative with a dilution ratio of 1:3.
Available in:
• 1L Bottles • 5L Jerry/5L Bucket
• 20L Bucket • 25L Pail
• 200L Drums • 1000L Flowbins
Applications
-
Additive – Enhances adhesion, flexibility and water repellency of plaster, screed, tiling adhesive or grout.
-
Keying agent – improves adhesion to smooth, dense, non-porous surfaces.
-
Primer and bonding agent – revive friable/porous surfaces and improves adhesion to the old surface.
Instructions
-
Surfaces must be dry, clean and free from dirt, dust, grease or any other contaminants prior to application.
-
Shake or stir before use. Ready to use, do not dilute further.
-
Additive: Mix into the cement/screed/grout/adhesive in place of the water.
-
Barrier coat: Apply 2 coats to the surface.
-
Bonding agent: Apply 2 coats to the old, friable or porous surface before plastering/screeding/tiling.
-
Application can be done by hand with a roller, brush or spray.
-
Allow each coat to dry before applying the next but be sure to plaster/screed whilst still wet.
-
Excess material can be wiped away with a damp cloth while wet. Tools can be cleaned with warm soapy water.
* For more information please view our data sheet.
Plaster Bond & Tile Key
SILTECH Plaster Bond & Tile Key T20 is a water based liquid concentrate for use in the construction industry as
well as in DIY applications. It can be used as a bonding agent between new and old surfaces; as a primer coat
prior to plastering, screeding or tiling, particularly if the surface is friable/powdery; as a keying agent on
smooth surfaces or as a barrier coating between incompatible surfaces. When added to cement, screeds and grouts, SILTECH Plaster Bond & Tile Key T20 will add flexibility, adhesion and water repellency.
Available in:
• 1L Bottles • 5L Jerry/5L Bucket
• 20L Bucket • 25L Pail
• 200L Drums • 1000L Flowbins
Applications
-
Additive – Enhances adhesion, flexibility and water repellency of plaster, screed, tiling adhesive or grout.
-
Keying agent – improves adhesion to smooth, dense, non-porous surfaces.
-
Primer and bonding agent – revive friable/porous surfaces and improves adhesion to the old surface.
Instructions
-
Surfaces must be dry, clean and free from dirt, dust, grease or any other contaminants prior to
application. -
Shake or stir before use.
-
Additive: Dilute 1:3 with water and mix into the cement/screed/grout/adhesive in place of the water.
-
Barrier coat: Dilute 1:3 with water and apply 2 coats to the surface.
-
Bonding agent: Dilute 1:3 with water and apply 2 coats to the old, friable or porous surface before
plastering/screeding/tiling. -
Application can be done by hand with a roller, brush or spray.
-
Allow each coat to dry before applying the next but be sure to plaster/screed whilst still wet.
-
Excess material can be wiped away with a damp cloth while wet. Tools can be cleaned with warm
soapy water.
Note: Do not use as a final/surface coat. Not a suitable solution for surfaces with rising damp problems.
* For more information please view our data sheet.
Bonding & Keying Agent
Siltech Bonding & Keying Agent is a water based liquid concentrate for use in the construction industry as well as in DIY applications. It can be used as a bonding agent between new and old surfaces; as a primer coat prior to plastering, screeding or tiling, particularly if the surface is friable/powdery; as a keying agent on smooth surfaces or as a barrier coating between incompatible surfaces. When added to cement, screeds and grouts, SILTECH Bonding & Keying Agent will add flexibility, adhesion and water repellency.
Available in:
• 1L Bottles • 5L Jerry/5L Bucket
• 20L Bucket • 25L Pail
• 200L Drums • 1000L Flowbins
Applications
-
Additive – Enhances adhesion, flexibility and water repellency of plaster, screed, tiling adhesive or grout.
-
Keying agent – improves adhesion to smooth, dense, non-porous surfaces.
-
Primer and bonding agent – revive friable/porous surfaces and improves adhesion to the old surface.
Instructions
-
Surfaces must be dry, clean and free from dirt, dust, grease or any other contaminants prior to application.
-
Shake or stir before use.
-
Additive: Dilute 1:3 with water and mix into the cement/screed/grout/adhesive in place of the water.
-
Barrier coat: Dilute 1:3 with water and apply 2 coats to the surface.
-
Bonding agent: Dilute 1:3 with water and apply 2 coats to the old, friable or porous surface before plastering/screeding/tiling.
-
Application can be done by hand with a roller, brush or spray.
-
Allow each coat to dry before applying the next but be sure to plaster/screed whilst still wet.
-
Excess material can be wiped away with a damp cloth while wet. Tools can be cleaned with warm soapy water.
* For more information please view our data sheet.